RRL Fire Hose Pipe
Rubber-reinforced lined delivery hose for hydrant points, supplied with coupled ends.
14 products in this range
The hardware that makes a hydrant system usable. We supply RRL and canvas hoses, hose reel drums, branch pipes and nozzles, instantaneous couplings, hose cabinets and the fire buckets and stands still required at many industrial premises.
A hydrant riser on its own does nothing. What makes it work on the day of a fire is the hose that reaches the seat of it, the coupling that does not leak, the nozzle that shapes the stream, and the cabinet that keeps all of it together and findable. Those items are what this range covers.
Delivery hose comes in two common forms. RRL hose (rubber-reinforced lined) is tough, resists abrasion and is the usual choice at industrial hydrant points. Canvas hose with a woven jacket is lighter to handle. Both are supplied with coupled ends in standard lengths.
Hose reel drums serve a different purpose. Instead of a flaked-out hose that has to be run, a reel holds a continuous small-bore hose that one person can pull out and use immediately. That makes reels the practical first-aid option at floor landings, corridors and parking levels. We supply fixed, swinging-arm and wall-mounted types.
A branch pipe connects to the hose and carries the nozzle, usually with a control valve so the stream can be shut off at the point of use. Nozzles are available in gunmetal and stainless, and the choice between a jet and a spray pattern depends on what you are fighting and how close you can safely get.
Instantaneous couplings are what let hose lengths join quickly under pressure. We supply male and female couplings, adaptors and blank caps in the sizes that pair with standard hose and valve connections — worth keeping spares of, because a damaged coupling puts a whole hose length out of service.
Hose cabinets keep hose, branch and couplings dry, together and at the hydrant point rather than scattered across a building. We supply single and double-door glass-fronted cabinets for internal use and steel hose boxes for outdoor and yard points. Conical fire buckets and four-bucket stands remain in use at many industrial premises for electrical rooms, DG areas and fuel storage points.
Most of this equipment is specified alongside a fire hydrant system, and sits behind the portable extinguishers that handle a fire in its first moments.
The Range
Sizes, capacities and makes vary — tell us about your premises and we will confirm what suits it, along with a price.
Rubber-reinforced lined delivery hose for hydrant points, supplied with coupled ends.
Woven-jacket delivery hose available in standard lengths and diameters.
Fixed drum with continuous-flow hose, giving first-aid firefighting at each floor landing.
Swing-arm drum that lets the hose be drawn out in any direction from a wall mounting.
Compact wall-fixed reel for corridors, staircase lobbies and parking levels.
Short branch with control valve for directing jet or spray from a hose line.
Gunmetal and stainless nozzles in the sizes normally paired with standard hose couplings.
Instantaneous male and female couplings, adaptors and blank caps for hose and valve connections.
Fixed monitor for high-volume water delivery over tank farms, yards and large open areas.
Glass-fronted cabinet housing hose, branch and coupling at each hydrant point.
Larger two-door cabinet where hose, reel and accessories are stored together.
Steel box for outdoor and yard hydrant points, finished in signal red.
Conical sand bucket for electrical rooms, DG areas and fuel storage points.
Four-bucket stand with hood, used at factory entrances and designated fire points.
Where It Is Used
RRL hose at yard and shed hydrant points, with water monitors where large open areas need high-volume cover.
Hose reel drums and glass-fronted cabinets at each floor landing, matched to the landing valve size.
Hose boxes along the perimeter, with couplings and spare lengths kept on site for long runs between points.
Wall-mounted reels at staircase lobbies and parking, where residents rather than trained staff may have to act.
Foam-capable branch pipes, water monitors and fire buckets at decanting and storage areas.
Swinging-type reels in corridors where the hose has to be drawn out in more than one direction.
Questions
RRL hose has a rubber-reinforced lining that resists abrasion and handles rough industrial use well. Canvas hose has a woven jacket and is lighter to handle. Both are supplied coupled, and the right one depends on where it will be stored and how it will be used.
A hose reel holds a continuous small-bore hose that one person can pull out and use straight away, which suits floor landings and corridors. A hose box stores flaked delivery hose for higher-volume use at hydrant points. Many buildings have both.
Instantaneous couplings come in standard sizes. Tell us the size of your existing valves and hose, or send a photograph on WhatsApp, and we will supply couplings and adaptors that match.
Fire buckets and stands remain in use at many industrial premises, particularly at electrical rooms, DG sets and fuel storage points. Whether they are required at your site depends on the applicable requirements for your premises.
Yes. We can replace hoses, couplings, nozzles, reels and cabinets on an existing installation, whoever originally supplied it.
Explore More
Portable and trolley-mounted extinguishers for electrical, solid, liquid and gas fire risks.
View rangeDetectors, call points, panels and sounders that raise an alarm early.
View rangeHydrant valves, landing valves, breeching inlets and pillar hydrants.
View rangePendent and upright sprinkler heads, flexible drops and accessories.
View rangeTell us the type of premises and the quantity you need. We will confirm what is appropriate and send you a price.